• Cart
    • Please enable WooCommerce

Classic and Vintage Fuel Tanks

[custom_headline type=”center” level=”h1″ looks_like=”h2″ accent=”true”]

Classic & Vintage Fuel Tanks


[gap size=”10″]

[image type=”none” float=”none” info=”none” info_place=”top” info_trigger=”hover” src=”599″ alt=”Fuel Tank | Northern Radiators”]

We are experts when it comes to fuel tank repairs, we can repair plastic, steel or aluminium. All fuel tanks have to be chemically cleaned internally and externally to remove any trace of flammable fuel before work can start

Small leaks and holes can be repaired by solder or welding. Larger damage or leaks may require a new section of material welding to the tank.

Tank Cleaning

Tank repairs

Tank restoration

New Tanks


Should the tank be too badly corroded or rusty we can restore it with our Fuel Tank ReNu system.

Fuel tanks usually suffer from a lot of wear and tear, which will often lead to corrosion and rust. The first thing people think of is to just replace it, but there is a more cost-effective and economically friendly way to deal with these tanks.

Fuel Tank ReNu is a method in which old and corroded fuel tanks are cleaned and plastic coated. The process used is both proven and patented. It can be both cheaper and faster than simply purchasing a new fuel tank.

The process is a unique one, and using chemical bonding. It coats both the inside and the outside of the tank, with a double layer of protection which is incredibly tough and durable. This chemical bonding seals the tank from rust and corrosion.

This Fuel Tank ReNu process is compatible with water, diesel, petrol, menthanal, alcohol and high octane. It has been well tested, and is a safe process to use.

If you have a tank that is old and a replacement hard to find, this is certainly a method you should use. It means that you will not have to waste time looking for a dealer to purchase a new one, as yours will be inevitably be in a better condition after anyway. It can also be used on vintage tanks that need restoring, and new tanks to give them a lifetime protection.

The Process

The tank is defumed before it is blasted back to bare metal, inside and out (Holes will be cut to gain access) A liquid plastic is applied to the inside and outside of the tank. The tank is then placed in an industrial oven to cure the plastic. The end result is a steel tank that is protected inside and out with a durable plastic coating. Please note the tank will have a rubberised appearance. For vintage tanks the coating would only be applied internally.

New Tanks

We stock over 100 new steel tanks tanks for car and light commercials, all which have the benefit of a year’s warranty.

Back to top